SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 8-K
CURRENT REPORT
Pursuant to Section 13 or 15(d)
of the Securities Exchange Act of 1934
Date of Report (Date of earliest event reported): July 26, 2017
Universal Stainless & Alloy Products, Inc.
(Exact name of registrant as specified in its charter)
| Delaware | 000-25032 | 25-1724540 | ||
| (State or other jurisdiction of incorporation) |
(Commission File Number) |
(IRS Employer Identification No.) | ||
| 600 Mayer Street, Bridgeville, Pennsylvania (Address of principal executive offices) |
15017 | |||
| (Zip code) | ||||
Registrant’s telephone number, including area code: (412) 257-7600
Check the appropriate box below if the Form 8–K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2.):
| ☐ | Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) |
| ☐ | Soliciting material pursuant to Rule 14a–12 under the Exchange Act (17 CFR 240.14a–12) |
| ☐ | Pre–commencement communications pursuant to Rule 14d–2(b) under the Exchange Act (17 CFR 240.14d–2(b)) |
| ☐ | Pre–commencement communications pursuant to Rule 13e–4(c) under the Exchange Act (17 CFR 240.13e–4(c)) |
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (17 CFR §230.405) or Rule 12b-2 of the Securities Exchange Act of 1934 (17 CFR §240.12b-2).
Emerging growth company ☐
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
| Item 2.02. | Results of Operations and Financial Condition. |
On July 26, 2017, Universal Stainless and Alloy Products, Inc. issued a press release regarding its earnings for the quarter ended June 30, 2017. A copy of the press release is attached hereto as Exhibit 99.1.
The information in this Current Report on Form 8-K, including the attached press release regarding the Company’s earnings for the quarter ended June 30, 2017, shall not be deemed “filed” for the purposes of Section 18 of the Securities Exchange Act of 1934, as amended, or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, as amended, except as shall be expressly set forth by specific reference in such a filing.
| Item 9.01. | Financial Statements and Exhibits. |
| (d) | Exhibits |
| 99.1 | Press Release dated July 26, 2017 |
SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC. | ||
| By: | /s/ Ross C. Wilkin | |
| Ross C. Wilkin | ||
| Vice President of Finance, | ||
| Chief Financial Officer and Treasurer | ||
Dated: July 26, 2017
Exhibit 99.1
| CONTACTS: | Dennis M. Oates | Ross C. Wilkin | June Filingeri | |||||
| Chairman, | VP Finance, CFO | President | ||||||
| President and CEO | and Treasurer | Comm-Partners LLC | ||||||
| (412) 257-7609 | (412) 257-7662 | (203) 972-0186 |
FOR IMMEDIATE RELEASE
UNIVERSAL STAINLESS REPORTS SIGNIFICANTLY IMPROVED Q2 2017 RESULTS
| • | Q2 Sales of $52.6 Million, Up 7.6% Sequentially, and Up 28.2% vs. Q2 2016 |
| • | Net Income in Q2 Totals $1.2 Million, or $0.17 per Diluted Share |
| • | EBITDA in Q2 Increased to $7.3 Million, Up 74.0% Sequentially, and Up 69.4% vs. Q2 2016 |
| • | Quarter-End Backlog of $63.5 Million, Up 11.2% Sequentially, and Up 64.8% vs. Q2 2016 |
BRIDGEVILLE, PA July 26, 2017 – Universal Stainless & Alloy Products, Inc. (Nasdaq: USAP) today reported strong sales growth including record premium alloy sales and a return to bottom-line profitability in the second quarter of 2017. Results for the second quarter of 2017 included sequential and year-over-year increases in net sales and backlog, as well as in gross margin, net income and EBITDA.
Net sales for the second quarter of 2017 were $52.6 million, up 7.6% sequentially, and up 28.2% compared with the second quarter of 2016. All end markets made substantial contributions to the year-over-year growth, while sequential growth was driven by aerospace, power generation and heavy equipment sales, which increased 8.6%, 12.7% and 16.4%, respectively. In the second quarter of 2017, aerospace represented 55.1% of total sales.
Sales of premium alloys in the second quarter of 2017 reached a record $6.8 million, or 12.9% of sales, compared with $5.8 million, or 11.9% of sales, in the first quarter of 2017, and $3.8 million, or 9.2% of sales, in the second quarter of 2016.
For the first six months of 2017, sales increased 25.9% to $101.5 million from $80.6 million in the same period of 2016. Sales of premium alloys increased 60.7% to $12.6 million, or 12.4% of sales, in the first half of 2017, versus $7.8 million, or 9.7% of sales, in the first half of 2016.
The Company’s gross margin for the second quarter of 2017 was $7.2 million, or 13.6% of sales, a substantial increase from $4.2 million, or 8.7% of sales, in the first quarter of 2017, and $4.3 million, or 10.6% of sales, in the second quarter of 2016. Gross margin in the second quarter of 2017 benefited from the realization of manufacturing productivity savings, improved operating leverage, as well as a more favorable product mix.
For the second quarter of 2017, SG&A was $4.5 million, or 8.6% of sales, compared with $4.7 million, or 9.7% of sales, in the first quarter of 2017, and $4.6 million, or 11.2% of sales, in the 2016 second quarter.
The Company achieved net income of $1.2 million, or $0.17 per diluted share in the second quarter of 2017, compared with a net loss of $1.2 million, or $0.17 per diluted share in the first quarter of 2017, and a net loss of $0.8 million, or $0.11 per diluted share, in the second quarter of 2016.
For the first half of 2017, the Company was breakeven on a net income basis versus recording a net loss of $3.2 million, or $0.45 per diluted share, in the first half of 2016.
1
The Company’s EBITDA for the second quarter of 2017 improved substantially to $7.3 million, an increase of $3.1 million, or 74.0%, sequentially, and was up $3.0 million, or 69.4%, compared with the second quarter of 2016.
Backlog (before surcharges) at June 30, 2017 was $63.5 million, up 11.2% from March 31, 2017, and up 64.8% from the end of the 2016 second quarter.
The Company’s debt was $77.7 million at June 30, 2017, compared with $74.5 million at March 31, 2017, reflecting additional working capital required to support increased business activity. Capital expenditures for the second quarter of 2017 were $1.7 million, compared with $1.4 million in the first quarter of 2017 and $0.9 million in the second quarter of 2016.
Chairman, President and CEO Dennis Oates commented: “The recovery that began in the first quarter of 2017 continued to show traction in the second quarter, with business and plant activity levels strong and our sales growing both sequentially and year-over-year. Premium alloy sales reached a new record reflecting our progress in advancing the transformation of Universal Stainless through our focus on faster growth in value-added premium alloys. That progress, combined with further cost improvements, led to a step-change in our gross margin, which is at the highest level since 2014. As a result, we saw a decisive return to bottom-line profitability in the quarter, with net income of $0.17 per diluted share, as well as substantial growth in EBITDA.
“As we enter the third quarter and second half of the year, business conditions and demand remain positive with continued strength in our order entry and backlog.”
Webcast
The Company has scheduled a conference call for today, July 26, 2017, at 10:00 a.m. (Eastern) to discuss second quarter 2017 results. A simultaneous webcast will be available on the Company’s website at www.univstainless.com, and thereafter archived on the website through the end of the third quarter of 2017.
About Universal Stainless & Alloy Products, Inc.
Universal Stainless & Alloy Products, Inc., headquartered in Bridgeville, PA, manufactures and markets semi-finished and finished specialty steels, including stainless steel, nickel alloys, tool steel and certain other alloyed steels. The Company’s products are used in a variety of industries, including aerospace, power generation, oil and gas, and heavy equipment manufacturing. Established in 1994, the Company, with its experience, technical expertise, and dedicated workforce, stands committed to providing the best quality, delivery, and service possible. More information is available at www.univstainless.com.
2
Forward-Looking Information Safe Harbor
Except for historical information contained herein, the statements in this release are forward-looking statements that are made pursuant to the “safe harbor” provision of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks and uncertainties that may cause the Company’s actual results in future periods to differ materially from forecasted results. Those risks include, among others, the concentrated nature of the Company’s customer base to date and the Company’s dependence on its significant customers; the receipt, pricing and timing of future customer orders; changes in product mix; the limited number of raw material and energy suppliers and significant fluctuations that may occur in raw material and energy prices; risks related to property, plant and equipment, including the Company’s reliance on the continuing operation of critical manufacturing equipment; risks associated with labor matters; the Company’s ongoing requirement for continued compliance with laws and regulations, including applicable safety and environmental regulations; the ultimate outcome of the Company’s current and future litigation and matters; risks related to acquisitions that the Company may make; and the impact of various economic, credit and market risk uncertainties. Many of these factors are not within the Company’s control and involve known and unknown risks and uncertainties that may cause the Company’s actual results in future periods to be materially different from any future performance suggested herein. Any unfavorable change in the foregoing or other factors could have a material adverse effect on the Company’s business, financial condition and results of operations. Further, the Company operates in an industry sector where securities values may be volatile and may be influenced by economic and other factors beyond the Company’s control. Certain of these risks and other risks are described in the Company’s filings with the Securities and Exchange Commission (SEC) over the last 12 months, copies of which are available from the SEC or may be obtained upon request from the Company.
Non-GAAP Financial Measures
This press release includes discussions of financial measures that have not been determined in accordance with U.S. Generally Accepted Accounting Principles (GAAP). These measures include earnings (loss) before interest, income taxes, depreciation and amortization (EBITDA) and Adjusted EBITDA. We include these measurements to enhance the understanding of our operating performance. We believe that EBITDA, considered along with net earnings (loss), is a relevant indicator of trends relating to cash generating activity of our operations. Adjusted EBITDA excludes the effect of share-based compensation expense and other non-cash generating activity such as impairments and the write-off of deferred financing costs. We believe excluding these costs provides a consistent comparison of the cash generating activity of our operations. We believe that EBITDA and Adjusted EBITDA are useful to investors as they facilitate a comparison of our operating performance to other companies who also use EBITDA and Adjusted EBITDA as supplemental operating measures. These non-GAAP financial measures supplement our GAAP disclosures and should not be considered an alternative to the GAAP measures. These non-GAAP measures may not be entirely comparable to similarly titled measures used by other companies due to potential differences among calculations methodologies. A reconciliation of these non-GAAP financial measures to their most directly comparable financial measure prepared in accordance with GAAP is included in the tables that follow.
-TABLES FOLLOW -
3
UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC.
FINANCIAL HIGHLIGHTS
(Dollars in Thousands, Except Per Share Information)
(Unaudited)
CONSOLIDATED STATEMENTS OF OPERATIONS
| Three months ended | Six months ended | |||||||||||||||
| June 30, | June 30, | |||||||||||||||
| 2017 | 2016 | 2017 | 2016 | |||||||||||||
| Net Sales |
||||||||||||||||
| Stainless steel |
$ | 37,156 | $ | 30,172 | $ | 72,190 | $ | 59,449 | ||||||||
| High-strength low alloy steel |
3,418 | 3,784 | 7,590 | 7,563 | ||||||||||||
| Tool steel |
8,665 | 4,305 | 15,722 | 8,207 | ||||||||||||
| High-temperature alloy steel |
2,901 | 1,626 | 4,877 | 3,266 | ||||||||||||
| Conversion services and other sales |
467 | 1,143 | 1,103 | 2,139 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Total net sales |
52,607 | 41,030 | 101,482 | 80,624 | ||||||||||||
| Cost of products sold |
45,441 | 36,691 | 90,071 | 74,944 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Gross margin |
7,166 | 4,339 | 11,411 | 5,680 | ||||||||||||
| Selling, general and administrative expenses |
4,499 | 4,591 | 9,228 | 8,429 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Operating income (loss) |
2,667 | (252 | ) | 2,183 | (2,749 | ) | ||||||||||
| Interest expense |
1,020 | 887 | 1,959 | 1,870 | ||||||||||||
| Deferred financing amortization |
64 | 61 | 128 | 888 | ||||||||||||
| Other (income) expense |
(14 | ) | 39 | (20 | ) | 92 | ||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Income (loss) before income taxes |
1,597 | (1,239 | ) | 116 | (5,599 | ) | ||||||||||
| Provision (benefit) for income taxes |
369 | (437 | ) | 107 | (2,357 | ) | ||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Net income (loss) |
$ | 1,228 | $ | (802 | ) | $ | 9 | $ | (3,242 | ) | ||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Net income (loss) per common share - Basic |
$ | 0.17 | $ | (0.11 | ) | $ | 0.00 | $ | (0.45 | ) | ||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Net income (loss) per common share - Diluted |
$ | 0.17 | $ | (0.11 | ) | $ | 0.00 | $ | (0.45 | ) | ||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Weighted average shares of common stock outstanding |
||||||||||||||||
| Basic |
7,219,423 | 7,196,891 | 7,217,943 | 7,179,746 | ||||||||||||
| Diluted |
7,360,137 | 7,196,891 | 7,333,106 | 7,179,746 | ||||||||||||
4
MARKET SEGMENT INFORMATION
| Three months ended | Six months ended | |||||||||||||||
| June 30, | June 30, | |||||||||||||||
| 2017 | 2016 | 2017 | 2016 | |||||||||||||
| Net Sales |
||||||||||||||||
| Service centers |
$ | 37,382 | $ | 29,817 | $ | 70,111 | $ | 57,331 | ||||||||
| Original equipment manufacturers |
4,756 | 3,395 | 8,878 | 7,690 | ||||||||||||
| Rerollers |
5,259 | 3,281 | 11,812 | 6,496 | ||||||||||||
| Forgers |
4,744 | 3,394 | 9,578 | 6,968 | ||||||||||||
| Conversion services and other sales |
466 | 1,143 | 1,103 | 2,139 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Total net sales |
$ | 52,607 | $ | 41,030 | $ | 101,482 | $ | 80,624 | ||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Tons shipped |
10,090 | 8,313 | 20,421 | 15,884 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
MELT TYPE INFORMATION
| Three months ended | Six months ended | |||||||||||||||
| June 30, | June 30, | |||||||||||||||
| 2017 | 2016 | 2017 | 2016 | |||||||||||||
| Net Sales |
||||||||||||||||
| Specialty alloys |
$ | 45,371 | $ | 36,108 | $ | 87,776 | $ | 70,644 | ||||||||
| Premium alloys * |
6,770 | 3,779 | 12,603 | 7,841 | ||||||||||||
| Conversion services and other sales |
466 | 1,143 | 1,103 | 2,139 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Total net sales |
$ | 52,607 | $ | 41,030 | $ | 101,482 | $ | 80,624 | ||||||||
|
|
|
|
|
|
|
|
|
|||||||||
END MARKET INFORMATION **
| Three months ended | Six months ended | |||||||||||||||
| June 30, | June 30, | |||||||||||||||
| 2017 | 2016 | 2017 | 2016 | |||||||||||||
| Net Sales |
||||||||||||||||
| Aerospace |
$ | 28,995 | $ | 26,293 | $ | 55,687 | $ | 51,659 | ||||||||
| Power generation |
4,774 | 3,427 | 9,008 | 6,924 | ||||||||||||
| Oil & gas |
4,814 | 2,834 | 9,703 | 6,179 | ||||||||||||
| Heavy equipment |
8,948 | 4,371 | 16,633 | 8,404 | ||||||||||||
| General industrial, conversion services and other sales |
5,076 | 4,105 | 10,451 | 7,458 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Total net sales |
$ | 52,607 | $ | 41,030 | $ | 101,482 | $ | 80,624 | ||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| * | Premium alloys represent all vacuum induction melted (VIM) products. |
| ** | The majority of our products are sold to service centers rather than the ultimate end market customers. The end market information in this press release is our estimate based upon our knowledge of our customers and the grade of material sold to them, which they will in-turn sell to the ultimate end market customer. |
5
CONDENSED CONSOLIDATED BALANCE SHEETS
| June 30, | December 31, | |||||||
| 2017 | 2016 | |||||||
| Assets |
||||||||
| Cash |
$ | 97 | $ | 75 | ||||
| Accounts receivable, net |
29,030 | 19,437 | ||||||
| Inventory, net |
100,140 | 91,342 | ||||||
| Other current assets |
4,237 | 2,729 | ||||||
|
|
|
|
|
|||||
| Total current assets |
133,504 | 113,583 | ||||||
| Property, plant and equipment, net |
177,408 | 182,398 | ||||||
| Other long-term assets1 |
64 | 64 | ||||||
|
|
|
|
|
|||||
| Total assets |
$ | 310,976 | $ | 296,045 | ||||
|
|
|
|
|
|||||
| Liabilities and Stockholders’ Equity |
||||||||
| Accounts payable |
$ | 29,129 | $ | 19,906 | ||||
| Accrued employment costs |
3,253 | 3,803 | ||||||
| Current portion of long-term debt |
4,675 | 4,579 | ||||||
| Other current liabilities |
1,051 | 898 | ||||||
|
|
|
|
|
|||||
| Total current liabilities |
38,108 | 29,186 | ||||||
| Long-term debt |
73,013 | 67,998 | ||||||
| Deferred income taxes |
16,757 | 17,629 | ||||||
| Other long-term liabilities |
12 | 12 | ||||||
|
|
|
|
|
|||||
| Total liabilities |
127,890 | 114,825 | ||||||
| Stockholders’ equity |
183,086 | 181,220 | ||||||
|
|
|
|
|
|||||
| Total liabilities and stockholders’ equity |
$ | 310,976 | $ | 296,045 | ||||
|
|
|
|
|
|||||
6
CONSOLIDATED STATEMENTS OF CASH FLOW
| Six months ended | ||||||||
| June 30, | ||||||||
| 2017 | 2016 | |||||||
| Operating activities: |
||||||||
| Net income (loss) |
$ | 9 | $ | (3,242 | ) | |||
| Adjustments to reconcile net income (loss) to net cash (used in) provided by operating activities: |
||||||||
| Depreciation and amortization |
9,365 | 9,147 | ||||||
| Deferred income tax |
(16 | ) | (2,365 | ) | ||||
| Write-off of deferred financing costs |
— | 768 | ||||||
| Share-based compensation expense |
971 | 684 | ||||||
| Net gain on asset disposals |
— | (349 | ) | |||||
| Changes in assets and liabilities: |
||||||||
| Accounts receivable, net |
(9,614 | ) | (2,350 | ) | ||||
| Inventory, net |
(9,798 | ) | (2,141 | ) | ||||
| Accounts payable |
8,655 | 6,140 | ||||||
| Accrued employment costs |
(550 | ) | 186 | |||||
| Income taxes |
117 | 265 | ||||||
| Other, net |
(752 | ) | 19 | |||||
|
|
|
|
|
|||||
| Net cash (used in) provided by operating activities |
(1,613 | ) | 6,762 | |||||
| Investing activities: |
||||||||
| Capital expenditures |
(3,068 | ) | (1,736 | ) | ||||
| Proceeds from sale of property, plant and equipment |
— | 1,571 | ||||||
|
|
|
|
|
|||||
| Net cash used in investing activities |
(3,068 | ) | (165 | ) | ||||
| Financing activities: |
||||||||
| Borrowings under revolving credit facility |
158,180 | 131,030 | ||||||
| Payments on revolving credit facility |
(150,830 | ) | (152,298 | ) | ||||
| Borrowings under term loan facility |
— | 30,000 | ||||||
| Payments on term loan facility, capital leases, and convertible notes |
(2,751 | ) | (15,171 | ) | ||||
| Payments of deferred financing costs |
— | (702 | ) | |||||
| Proceeds from the issuance of common stock |
104 | 500 | ||||||
|
|
|
|
|
|||||
| Net cash provided by (used in) financing activities |
4,703 | (6,641 | ) | |||||
|
|
|
|
|
|||||
| Net increase (decrease) in cash |
22 | (44 | ) | |||||
| Cash at beginning of period |
75 | 112 | ||||||
|
|
|
|
|
|||||
| Cash at end of period |
$ | 97 | $ | 68 | ||||
|
|
|
|
|
|||||
7
RECONCILIATION OF NET INCOME (LOSS) TO EBITDA AND ADJUSTED EBITDA
| Three Months ended | Six Months ended | |||||||||||||||
| June 30, | June 30, | |||||||||||||||
| 2017 | 2016 | 2017 | 2016 | |||||||||||||
| Net income (loss) |
$ | 1,228 | $ | (802 | ) | $ | 9 | $ | (3,242 | ) | ||||||
| Interest expense |
1,020 | 887 | 1,959 | 1,870 | ||||||||||||
| Provision (benefit) for income taxes |
369 | (437 | ) | 107 | (2,357 | ) | ||||||||||
| Depreciation and amortization |
4,648 | 4,641 | 9,365 | 9,147 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| EBITDA |
7,265 | 4,289 | 11,440 | 5,418 | ||||||||||||
| Share-based compensation expense |
437 | 279 | 971 | 684 | ||||||||||||
| Write-off of deferred financing costs |
— | — | — | 768 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Adjusted EBITDA |
$ | 7,702 | $ | 4,568 | $ | 12,411 | $ | 6,870 | ||||||||
|
|
|
|
|
|
|
|
|
|||||||||
8