SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 8-K
CURRENT REPORT
Pursuant to Section 13 or 15(d)
of the Securities Exchange Act of 1934
Date of Report (Date of earliest event reported): July 27, 2016
Universal Stainless & Alloy Products, Inc.
(Exact name of registrant as specified in its charter)
| Delaware | 000-25032 | 25-1724540 | ||
| (State or other jurisdiction of incorporation) |
(Commission File Number) |
(IRS Employer Identification No.) | ||
| 600 Mayer Street, Bridgeville, Pennsylvania | 15017 | |||
| (Address of principal executive offices) | (Zip code) | |||
Registrant’s telephone number, including area code: (412) 257-7600
Check the appropriate box below if the Form 8–K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions (see General Instruction A.2.):
| ¨ | Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) |
| ¨ | Soliciting material pursuant to Rule 14a–12 under the Exchange Act (17 CFR 240.14a–12) |
| ¨ | Pre–commencement communications pursuant to Rule 14d–2(b) under the Exchange Act (17 CFR 240.14d–2(b)) |
| ¨ | Pre–commencement communications pursuant to Rule 13e–4(c) under the Exchange Act (17 CFR 240.13e–4(c)) |
| Item 2.02. | Results of Operations and Financial Condition. |
On July 27, 2016, Universal Stainless and Alloy Products, Inc. (the “Company”) issued a press release regarding its results for the quarter ended June 30, 2016. A copy of the press release is attached hereto as Exhibit 99.1.
The information in this Current Report on Form 8-K, including the attached press release regarding the Company’s results for the quarter ended June 30, 2016, shall not be deemed “filed” for the purposes of Section 18 of the Securities Exchange Act of 1934, as amended, or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, as amended, except as shall be expressly set forth by specific reference in such a filing.
| Item 9.01. | Financial Statements and Exhibits. |
| (d) | Exhibits |
| 99.1 | Press Release dated July 27, 2016 |
SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
| UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC. | ||
| By: | /s/ Ross C. Wilkin | |
| Ross C. Wilkin | ||
| Vice President of Finance, | ||
| Chief Financial Officer and Treasurer | ||
Dated: July 27, 2016
Exhibit 99.1
| CONTACTS: | Dennis M. Oates | Ross C. Wilkin | Brian M. Rayle | |||||
| Chairman, | VP Finance, CFO | Managing Director | ||||||
| President and CEO | and Treasurer | Libertatis Consulting | ||||||
| (412) 257-7609 | (412) 257-7662 | (440) 827-2019 |
FOR IMMEDIATE RELEASE
UNIVERSAL STAINLESS REPORTS SECOND QUARTER 2016 RESULTS
| • | Net Sales in the Second Quarter Total $41.0 Million, up 3.6% Sequentially |
| • | Gross Margin in the Second Quarter Improves to $4.3 million, or 10.6% of Sales |
| • | Cash Flow From Operating Activities in the Second Quarter Totals $5.2 Million |
| • | Net Loss in the Second Quarter Totals $0.11 per Diluted Share Versus a Net Loss per Diluted Share of $0.34 in the First Quarter of 2016 |
BRIDGEVILLE, PA, July 27, 2016 – Universal Stainless & Alloy Products, Inc. (Nasdaq: USAP) today reported financial results for the second quarter of 2016 showing broad improvements over the first quarter of 2016.
Net sales for the second quarter of 2016 were $41.0 million, up 3.6% sequentially from the first quarter of 2016, with the increase driven primarily by sales to the Aerospace end market. In the second quarter of 2015, net sales were $49.6 million. For the first six months of 2016, net sales were $80.6 million, compared with $105.6 million in the same period of 2015.
The Company’s gross margin for the second quarter of 2016 improved to $4.3 million, or 10.6% of sales, compared with $1.3 million, or 3.4% of sales, in the first quarter of 2016. The improvement reflects the benefit of productivity enhancements, as well as better alignment of customer surcharges and input commodity costs. In the second quarter of 2015, gross margin was $5.2 million, or 10.5% of sales.
For the second quarter of 2016, the Company generated cash flow from operating activities of $5.2 million, primarily through improved operating results and lower working capital. Capital expenditures for the second quarter were $0.9 million, and total debt was reduced by $5.1 million.
The Company’s net loss for the second quarter of 2016 was $0.8 million, or $0.11 per diluted share, improved from a net loss of $2.4 million, or $0.34 per diluted share, in the first quarter of 2016. In the second quarter of 2015, the Company had a net loss of $0.4 million, or $0.05 per diluted share.
Backlog (before surcharges) at June 30, 2016 was $38.5 million, down 3.3% from $39.8 million at the end of the 2016 first quarter. Shorter customer lead times have continued to keep the Company’s backlog lower than normal.
Sales of premium alloys in the second quarter of 2016 totaled $3.8 million, or 9.2% of sales, compared with $4.2 million, or 8.6% of sales, in the second quarter of 2015. Premium alloy sales in the first six months of 2016 were $7.8 million, or 9.7% of total sales, compared with $9.3 million, or 8.8% of total sales, in the same period of 2015.
Chairman, President and CEO Dennis Oates commented: “The return to double-digit gross profit margin was a key driver to our sequential profitability improvement and the generation of $5.2 million of cash flow from operations in second quarter. Improved operational productivity and better alignment of input commodity costs and surcharges have positioned us to have healthy incremental margins when demand further improves.
1
“As expected, 2016 continues to be a transition year and is evolving with modest improvements in market demand. However, demand is currently tempered by lingering economic uncertainty and short industry lead-times.
“As we start the second half of 2016, we remain fully focused on capturing opportunities in this recovering marketplace while continuing to advance the transformation of Universal Stainless through our move to higher value, higher margin premium alloys.”
Webcast
The Company has scheduled a conference call for today, July 27, at 10:00 a.m. (Eastern) to discuss second quarter 2016 results. A simultaneous webcast will be available on the Company’s website at www.univstainless.com, and thereafter archived on the website through the end of the third quarter of 2016.
About Universal Stainless & Alloy Products, Inc.
Universal Stainless & Alloy Products, Inc., headquartered in Bridgeville, PA, manufactures and markets semi-finished and finished specialty steels, including stainless steel, nickel alloys, tool steel and certain other alloyed steels. The Company’s products are used in a variety of industries, including aerospace, power generation, oil and gas, and heavy equipment manufacturing. Established in 1994, the Company, with its experience, technical expertise, and dedicated workforce, stands committed to providing the best quality, delivery, and service possible. More information is available at www.univstainless.com.
Forward-Looking Information Safe Harbor
Except for historical information contained herein, the statements in this release are forward-looking statements that are made pursuant to the “safe harbor” provision of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks and uncertainties that may cause the Company’s actual results in future periods to differ materially from forecasted results. Those risks include, among others, the concentrated nature of the Company’s customer base to date and the Company’s dependence on its significant customers; the receipt, pricing and timing of future customer orders; changes in product mix; the limited number of raw material and energy suppliers and significant fluctuations that may occur in raw material and energy prices; risks related to property, plant and equipment, including the Company’s reliance on the continuing operation of critical manufacturing equipment; risks associated with labor matters; the Company’s ongoing requirement for continued compliance with laws and regulations, including applicable safety and environmental regulations; the ultimate outcome of the Company’s current and future litigation and matters; risks related to acquisitions that the Company may make; and the impact of various economic, credit and market risk uncertainties. Many of these factors are not within the Company’s control and involve known and unknown risks and uncertainties that may cause the Company’s actual results in future periods to be materially different from any future performance suggested herein. Any unfavorable change in the foregoing or other factors could have a material adverse effect on the Company’s business, financial condition and results of operations. Further, the Company operates in an industry sector where securities values may be volatile and may be influenced by economic and other factors beyond the Company’s control. Certain of these risks and other risks are described in the Company’s filings with the Securities and Exchange Commission (SEC) over the last 12 months, copies of which are available from the SEC or may be obtained upon request from the Company.
-TABLES FOLLOW -
2
UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC.
FINANCIAL HIGHLIGHTS
(Dollars in Thousands, Except Per Share Information)
(Unaudited)
CONSOLIDATED STATEMENTS OF OPERATIONS
| Three months ended | Six months ended | |||||||||||||||
| June 30, | June 30, | |||||||||||||||
| 2016 | 2015 | 2016 | 2015 | |||||||||||||
| Net Sales |
||||||||||||||||
| Stainless steel |
$ | 30,172 | $ | 36,955 | $ | 59,449 | $ | 81,353 | ||||||||
| High-strength low alloy steel |
3,784 | 4,154 | 7,563 | 9,432 | ||||||||||||
| Tool steel |
4,305 | 5,086 | 8,207 | 8,893 | ||||||||||||
| High-temperature alloy steel |
1,626 | 2,051 | 3,266 | 3,469 | ||||||||||||
| Conversion services and other sales |
1,143 | 1,364 | 2,139 | 2,446 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Total net sales |
41,030 | 49,610 | 80,624 | 105,593 | ||||||||||||
| Cost of products sold |
36,691 | 44,424 | 74,944 | 94,697 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Gross margin |
4,339 | 5,186 | 5,680 | 10,896 | ||||||||||||
| Selling, general and administrative expenses |
4,591 | 4,961 | 8,429 | 9,655 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Operating (loss) income |
(252 | ) | 225 | (2,749 | ) | 1,241 | ||||||||||
| Interest expense |
(887 | ) | (605 | ) | (1,870 | ) | (1,227 | ) | ||||||||
| Deferred financing amortization |
(61 | ) | (160 | ) | (888 | ) | (320 | ) | ||||||||
| Other (expense) income, net |
(39 | ) | 11 | (92 | ) | (33 | ) | |||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Loss before income taxes |
(1,239 | ) | (529 | ) | (5,599 | ) | (339 | ) | ||||||||
| Benefit for income taxes |
(437 | ) | (173 | ) | (2,357 | ) | (108 | ) | ||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Net loss |
$ | (802 | ) | $ | (356 | ) | $ | (3,242 | ) | $ | (231 | ) | ||||
|
|
|
|
|
|
|
|
|
|||||||||
| Net loss per common share -Basic |
$ | (0.11 | ) | $ | (0.05 | ) | $ | (0.45 | ) | $ | (0.03 | ) | ||||
|
|
|
|
|
|
|
|
|
|||||||||
| Net loss per common share -Diluted |
$ | (0.11 | ) | $ | (0.05 | ) | $ | (0.45 | ) | $ | (0.03 | ) | ||||
|
|
|
|
|
|
|
|
|
|||||||||
| Weighted average shares of common stock outstanding |
||||||||||||||||
| Basic |
7,196,891 | 7,061,545 | 7,179,746 | 7,058,026 | ||||||||||||
| Diluted |
7,196,891 | 7,061,545 | 7,179,746 | 7,058,026 | ||||||||||||
3
MARKET SEGMENT INFORMATION
| Three months ended | Six months ended | |||||||||||||||
| June 30, | June 30, | |||||||||||||||
| 2016 | 2015 | 2016 | 2015 | |||||||||||||
| Net Sales |
||||||||||||||||
| Service centers |
$ | 29,817 | $ | 34,393 | $ | 57,331 | $ | 71,804 | ||||||||
| Original equipment manufacturers |
3,395 | 5,790 | 7,690 | 12,736 | ||||||||||||
| Rerollers |
3,281 | 4,162 | 6,496 | 10,819 | ||||||||||||
| Forgers |
3,394 | 3,901 | 6,968 | 7,788 | ||||||||||||
| Conversion services and other sales |
1,143 | 1,364 | 2,139 | 2,446 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Total net sales |
$ | 41,030 | $ | 49,610 | $ | 80,624 | $ | 105,593 | ||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Tons shipped |
8,313 | 8,909 | 15,884 | 18,801 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
MELT TYPE INFORMATION
| Three months ended | Six months ended | |||||||||||||||
| June 30, | June 30, | |||||||||||||||
| 2016 | 2015 | 2016 | 2015 | |||||||||||||
| Net Sales |
||||||||||||||||
| Specialty alloys |
$ | 36,108 | $ | 44,001 | $ | 70,644 | $ | 93,863 | ||||||||
| Premium alloys * |
3,779 | 4,245 | 7,841 | 9,284 | ||||||||||||
| Conversion services and other sales |
1,143 | 1,364 | 2,139 | 2,446 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Total net sales |
$ | 41,030 | $ | 49,610 | $ | 80,624 | $ | 105,593 | ||||||||
|
|
|
|
|
|
|
|
|
|||||||||
END MARKET INFORMATION **
| Three months ended | Six months ended | |||||||||||||||
| June 30, | June 30, | |||||||||||||||
| 2016 | 2015 | 2016 | 2015 | |||||||||||||
| Net Sales |
||||||||||||||||
| Aerospace |
$ | 26,293 | $ | 30,379 | $ | 51,659 | $ | 64,140 | ||||||||
| Power generation |
3,427 | 5,074 | 6,924 | 12,398 | ||||||||||||
| Oil & gas |
2,834 | 4,113 | 6,179 | 10,214 | ||||||||||||
| Heavy equipment |
4,371 | 4,975 | 8,404 | 8,967 | ||||||||||||
| General industrial, conversion services and other sales |
4,105 | 5,069 | 7,458 | 9,874 | ||||||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| Total net sales |
$ | 41,030 | $ | 49,610 | $ | 80,624 | $ | 105,593 | ||||||||
|
|
|
|
|
|
|
|
|
|||||||||
| * | Premium alloys represent all vacuum induction melted (VIM) products. |
| ** | The majority of our products are sold to service centers rather than the ultimate end market customers. The end market information in this press release is our estimate based upon our knowledge of our customers and the grade of material sold to them, that they will in-turn sell to the ultimate end market customer. |
4
CONDENSED CONSOLIDATED BALANCE SHEETS
| June 30, | December 31, | |||||||
| 2016 | 2015 | |||||||
| Assets |
||||||||
| Cash |
$ | 68 | $ | 112 | ||||
| Accounts receivable, net |
20,033 | 17,683 | ||||||
| Inventory, net |
84,749 | 83,373 | ||||||
| Other current assets |
2,585 | 2,584 | ||||||
|
|
|
|
|
|||||
| Total current assets |
107,435 | 103,752 | ||||||
| Property, plant and equipment, net |
188,246 | 193,505 | ||||||
| Other long-term assets1 |
84 | 45 | ||||||
|
|
|
|
|
|||||
| Total assets |
$ | 295,765 | $ | 297,302 | ||||
|
|
|
|
|
|||||
| Liabilities and Stockholders’ Equity |
||||||||
| Accounts payable |
$ | 18,539 | $ | 11,850 | ||||
| Accrued employment costs |
3,442 | 3,256 | ||||||
| Current portion of long-term debt |
4,564 | 3,000 | ||||||
| Other current liabilities |
934 | 640 | ||||||
|
|
|
|
|
|||||
| Total current liabilities |
27,479 | 18,746 | ||||||
| Long-term debt1 |
67,036 | 72,884 | ||||||
| Deferred income taxes |
18,301 | 20,666 | ||||||
| Other long-term liabilities |
30 | 29 | ||||||
|
|
|
|
|
|||||
| Total liabilities |
112,846 | 112,325 | ||||||
| Stockholders’ equity |
182,919 | 184,977 | ||||||
|
|
|
|
|
|||||
| Total liabilities and stockholders’ equity |
$ | 295,765 | $ | 297,302 | ||||
|
|
|
|
|
|||||
| 1 | Reflects the retrospective adoption of ASC 2015-3, “Simplifying the Presentation of Debt Issuance Costs” which resulted in the reclassification of $1,253 of deferred financing costs from other long-term assets to a reduction of debt at December 31, 2015 to be consistent with the current period presentation. |
5
CONSOLIDATED STATEMENTS OF CASH FLOW
| Six months ended | ||||||||
| June 30, | ||||||||
| 2016 | 2015 | |||||||
| Operating activities: |
||||||||
| Net loss |
$ | (3,242 | ) | $ | (231 | ) | ||
| Adjustments to reconcile net loss to net cash provided by (used in) operating activities: |
||||||||
| Depreciation and amortization |
9,147 | 9,181 | ||||||
| Deferred income tax |
(2,365 | ) | (2 | ) | ||||
| Write-off of deferred financing costs |
768 | — | ||||||
| Share-based compensation expense |
684 | 961 | ||||||
| Net gain on asset disposals |
(349 | ) | — | |||||
| Changes in assets and liabilities: |
||||||||
| Accounts receivable, net |
(2,350 | ) | (1,123 | ) | ||||
| Inventory, net |
(2,141 | ) | 1,011 | |||||
| Accounts payable |
6,140 | (5,831 | ) | |||||
| Accrued employment costs |
186 | (2,782 | ) | |||||
| Income taxes |
265 | (272 | ) | |||||
| Other, net |
19 | (1,039 | ) | |||||
|
|
|
|
|
|||||
| Net cash provided by (used in) operating activities |
6,762 | (127 | ) | |||||
| Investing activities: |
||||||||
| Capital expenditures |
(1,736 | ) | (5,819 | ) | ||||
| Proceeds from sale of property, plant and equipment |
1,571 | — | ||||||
|
|
|
|
|
|||||
| Net cash used in investing activities |
(165 | ) | (5,819 | ) | ||||
| Financing activities: |
||||||||
| Borrowings under revolving credit facility |
131,030 | 63,848 | ||||||
| Payments on revolving credit facility |
(152,298 | ) | (56,512 | ) | ||||
| Borrowings under term loan facility |
30,000 | — | ||||||
| Payments on term loan facility, capital leases, and convertible notes |
(15,171 | ) | (1,500 | ) | ||||
| Payments of deferred financing costs |
(702 | ) | — | |||||
| Proceeds from the issuance of common stock |
500 | 388 | ||||||
|
|
|
|
|
|||||
| Net cash (used in) provided by financing activities |
(6,641 | ) | 6,224 | |||||
|
|
|
|
|
|||||
| Net (decrease) increase in cash |
(44 | ) | 278 | |||||
| Cash at beginning of period |
112 | 142 | ||||||
|
|
|
|
|
|||||
| Cash at end of period |
$ | 68 | $ | 420 | ||||
|
|
|
|
|
|||||
6