UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

 

FORM 10-Q

 

For the Quarterly Period Ended September 30, 2018

OR

For the Transition Period from              to             

Commission File Number 000-25032

 

UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC.

(Exact name of Registrant as specified in its charter)

 

 

 

600 Mayer Street

Bridgeville, PA 15017

(Address of principal executive offices, including zip code)

(412) 257-7600

(Registrant’s telephone number, including area code)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☑    No  ☐

Indicate by check mark whether the registrant has submitted electronically, if any, every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  ☑    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ☐    No  ☑

As of October 18, 2018, there were 8,724,990 shares of the Registrant’s common stock outstanding.

 

 

 

 

 

---

 

Universal Stainless & Alloy Products, Inc.

Table of Contents

 

 

 

 

i

---

 

UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(Dollars in Thousands, Except Per Share Information)

(Unaudited)

 

 

The accompanying notes are an integral part of these consolidated financial statements.

1

---

 

UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

(Dollars in Thousands)

(Unaudited)

 

 

2

---

 

UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC.

CONSOLIDATED BALANCE SHEETS

(Dollars in Thousands, Except Per Share Information)

(Unaudited)

 

 

The accompanying notes are an integral part of these consolidated financial statements. 

3

---

 

UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC.

CONSOLIDATED STATEMENTS OF CASH FLOW

(Dollars in Thousands)

(Unaudited)

 

 

The following table provides a reconciliation of cash and restricted cash reported within the Consolidated Balance Sheets that sums to the total of the same such amounts shown in the Consolidated Statements of Cash Flow.

 

 

Amounts included in restricted cash represent those funds required to be used pursuant to the construction of a new bar cell unit at the Company's Dunkirk, NY facility. These funds were obtained pursuant to the terms of the New Markets Tax Credit Program.

 

The accompanying notes are an integral part of these consolidated financial statements.

 

4

---

 

UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC.

NOTES TO THE UNAUDITED CONSOLIDATED FINANCIAL STATEMENTS

 

Note 1: Nature of Business and Basis of Presentation

Universal Stainless & Alloy Products, Inc., and its wholly-owned subsidiaries (“Universal”, “we”, “our” or the “Company”), manufacture and market semi-finished and finished specialty steel products, including stainless steel, nickel alloys, tool steel and certain other alloyed steels. Our manufacturing process involves melting, remelting, heat treating, hot and cold rolling, forging, machining and cold drawing of semi-finished and finished specialty steels. Our products are sold to service centers, forgers, rerollers, original equipment manufacturers and wire redrawers. Our customers further process our products for use in a variety of industries, including the aerospace, power generation, oil and gas, heavy equipment, and general industrial manufacturing industries. We also perform conversion services on materials supplied by customers.

The accompanying unaudited consolidated statements include the accounts of Universal Stainless & Alloy Products, Inc. and its subsidiaries and are prepared in accordance with U.S. generally accepted accounting principles (“U.S. GAAP”) for interim financial reports and the instructions for Form 10-Q and Rule 10-01 of Regulation S-X. Accordingly, certain information and footnote disclosures normally included in financial statements prepared under U.S. GAAP have been condensed or omitted pursuant to such regulations. However, we believe that the disclosures are adequate to make the information presented not misleading. These consolidated financial statements should be read in conjunction with our most recently audited financial statements and the notes thereto included in our Annual Report on Form 10-K as filed with the Securities and Exchange Commission. In the opinion of management, the accompanying financial statements include all adjustments necessary to present a fair presentation of the consolidated financial statements for the periods shown. Interim results are not necessarily indicative of the operating results for the full fiscal year or any future period. The preparation of these financial statements in conformity with U.S. GAAP requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and disclosure of contingent assets and liabilities. Actual results may differ from our estimates. The consolidated financial statements include our accounts and the accounts of our wholly–owned subsidiaries. We also consolidate, regardless of our ownership percentage, variable interest entities (each a “VIE”) for which we are deemed to have a controlling financial interest. All intercompany transactions and balances have been eliminated.

When we obtain an economic interest in an entity, we evaluate the entity to determine if the entity is a VIE, and if we are deemed to be a primary beneficiary. As a part of our evaluation, we are required to qualitatively assess if we are the primary beneficiary of the VIE based on whether we hold the power to direct those matters that most significantly impacted the activities of the VIE and the obligation to absorb losses or the right to receive the benefits of the VIE that could potentially be significant. Refer to Note 6, New Markets Tax Credit Financing Transaction, for a description of the VIE’s included in our consolidated financial statements.

Recently Adopted Accounting Pronouncements

In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2014-09, “Revenue from Contracts with Customers (Topic 606)” (“ASU 2014-09”), which supersedes the revenue recognition requirements in ASC 605, “Revenue Recognition.” ASU 2014-09 is based on the principle that revenue is recognized to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. It also requires additional disclosure about the nature, amount, timing, and uncertainty of revenue, cash flows arising from customer contracts, including significant judgments and changes in judgments, and assets recognized from costs incurred to obtain or fulfill a contract. ASU 2014-09 is effective for fiscal years beginning after December 15, 2017, including interim periods within that reporting period. The Company adopted the provisions of ASU 2014-09 on January 1, 2018, using the modified retrospective approach. Revenue from the Company’s product sales continue to generally be recognized when products are shipped (i.e. point in time). As such, the adoption of ASU 2014-09 had no material effect on revenue, gross margin or operating income; however, the Company has now presented the disclosures required by this new standard, refer to Note 3.

In November 2016, the FASB issued ASU 2016-18, “Statement of Cash Flows (Topic 230): Restricted Cash,” or (“ASU 2016-18”). ASU 2016-18 is intended to clarify how entities present restricted cash in the statement of cash flows. The guidance requires entities to show the changes in the total of cash and cash equivalents and restricted cash in the statement of cash flows. As a result, entities will no longer present transfers between cash and cash equivalents and restricted cash in the statement of cash flows. When cash and cash equivalents and restricted cash are presented in more than one line item on the balance sheet, the guidance requires a reconciliation of the totals in the statement of cash flows to the related captions in the balance sheet. This reconciliation can be presented either on the face of the statement of cash flows or in the notes to the financial statements. ASU 2016-18 is effective for fiscal years beginning after December 15, 2017 and is to be applied retrospectively. We adopted ASU 2016-18 in the first quarter of 2018 and applied the guidance retrospectively to our prior period Consolidated Statements of Cash Flow.

Recently Issued Accounting Pronouncements

The Company considers the applicability and impact of all ASUs.  Recently issued ASUs not listed below were assessed and determined to be either not applicable or are expected to have minimal impact on our consolidated financial statements.

In February 2016, the FASB issued ASU 2016-2 “Leases (Topic 842)”. The ASU requires lessees to recognize most leases on their balance sheet as a right-of-use asset and a lease liability. For income statement purposes, the FASB retained a dual model, requiring leases to be classified as either operating or finance. The criteria for evaluating are similar to those applied in current lease accounting. This guidance is effective for annual and interim reporting periods beginning after December 15, 2018 with early adoption permitted. We are currently evaluating the impact of this guidance on our financial statements and will adopt on January 1, 2019.

5

---

 

In February 2018, the FASB issued ASU 2018-02, “Income Statement – Reporting Comprehensive Income,” that will permit companies the option to reclassify stranded tax effects caused by the newly-enacted U.S. Tax Cuts and Jobs Act from accumulated other comprehensive income to retained earnings. Consequently, the amendments eliminate the stranded tax effects resulting from the Tax Cuts and Jobs Act and will improve the usefulness of information reported to financial statement users. However, because the amendments only relate to the reclassification of the income tax effects of the Tax Cuts and Jobs Act, the underlying guidance that requires that the effect of a change in tax laws or rates be included in income from continuing operations is not affected. Adoption of the ASU will be optional, and companies will need to disclose if it elects not to adopt the ASU. The ASU will be effective for fiscal years beginning after December 15, 2018, and interim periods within those fiscal years. Early adoption will be permitted, including adoption in any interim period, for financial statements that have not yet been issued or made available for issuance. Entities will have the option to apply the amendments retrospectively or to record the reclassification as of the beginning of the period of adoption. We are currently evaluating the impact of this guidance on our financial statements and will adopt on January 1, 2019.

 

In August 2018, the FASB issued ASU 2018-13, “Disclosure Framework–Changes to the Disclosure Requirements for Fair Value Measurement,” that will modify the disclosure requirements on fair value measurements in Topic 820, Fair Value Measurement, including the removal of certain disclosure requirements. The amendments in the ASU are effective for all entities for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2019. Early adoption is permitted upon issuance of the ASU. An entity is permitted to early adopt any removed or modified disclosures upon issuance of the ASU and delay adoption of the additional disclosures until the effective date. We are currently evaluating the impact of this guidance on our financial statements and will adopt on or before January 1, 2020.

Note 2: Net income (loss) per Common Share

The following table sets forth the computation of basic and diluted net income (loss) per common share:

 

 

On May 25, 2018, the Company completed an underwritten, public offering involving the issuance and sale by the Company of 1,224,490 shares of common stock at a public offering price of $24.50 per share. In addition, the Company granted the underwriters a 30-day option to purchase up to an additional 183,673 shares of common stock. On June 1, 2018, the underwriters exercised the option in full, and an additional 183,673 shares of common stock were issued and sold on June 5, 2018. The public offering resulted in gross proceeds to the Company of approximately $34.5 million, or $32.2 million net of the underwriting discount and other offering fees and expenses. We used the net proceeds from the public offering to repay amounts outstanding under the Company’s revolving credit facility. The public offering’s impact on the weighted average number of shares for the three and nine months ending September 30, 2018 is 1.4 million shares and 0.7 million shares, respectively.

We had options to purchase 236,000 and 495,675 shares of common stock outstanding at a weighted average price of $34.53 and $31.74 for the three months ended September 30, 2018 and 2017 which were excluded in the computation of diluted net income (loss) per common share for the three months ended September 30, 2018 and 2017, respectively. We had options to purchase 261,000 and 566,075 shares of common stock outstanding at an average price of $33.86 and $30.21 which were excluded in the computation of diluted net income (loss) per common share for the nine months ended September 30, 2018 and 2017, respectively. These outstanding options were not included in the computation of diluted net income (loss) per common share because their exercise prices were greater than the average market price of our common stock. The calculation of diluted net loss per

6

---

 

common share for the three months ended September 30, 2017 excluded 121,750 shares, for the assumed exercise of stock options as a result of being in a net loss position. The calculation of diluted net loss per common share for the nine months ended September 30, 2017 excluded 99,638 shares, for the assumed exercise of stock options as a result of being in a net loss position. In addition, for the three and nine months ended September 30, 2017, the calculation of diluted net loss per share excluded 39,216 and 29,101 shares, respectively, for the assumed issuance of stock for restricted stock units as a result of being in a net loss position.  

Note 3: Revenue Recognition

The Company’s revenues are primarily comprised of sales of products. Revenue is recognized when the Company satisfies its performance obligation under the contract by transferring the promised product to its customer that obtains control of the product. A performance obligation is a promise in a contract to transfer a distinct product to a customer. Most of the Company’s contracts have a single performance obligation, as the promise to transfer products or services is not separately identifiable from other promises in the contract and, therefore, not distinct.

Revenue is measured as the amount of consideration the Company expects to receive in exchange for transferring products. As such, revenue is recorded net of returns, allowances, customer discounts, and incentives. Sales and other taxes are excluded from revenues. Invoiced shipping and handling costs are included in revenue.

The Company’s revenue is primarily from products transferred to customers at a point in time. The Company recognizes revenue at the point in time in which the customer obtains control of the product, which is generally when product title passes to the customer upon shipment.

The Company has evaluated the impact of the new revenue recognition standard on individual customer contracts. We have determined that there are certain customer agreements involving production of specified product grades and shapes that require revenue to be recognized over time, in advance of shipment, due to there being no alternative use for these grades and shapes without significant economic loss. Also, the Company maintains an enforceable right to payment including a normal profit margin from the customer in the event of contract termination. Over-time recognition is a change from prior accounting, which was point-in-time for these products.  

The adoption of ASU 2014-09, using the modified retrospective approach, had no material effect on revenue, gross margin or operating income. Additionally, on January 1, 2018 the adoption had an immaterial impact on the Company’s Consolidated Balance Sheets. As of September 30, 2018, the adoption created contract assets related to services performed, not yet billed. These amounts are included in Accounts Receivable in the Consolidated Balance Sheets as of September 30, 2018. Contract assets recorded as of September 30, 2018 totaled $1.6 million. The Company does not have any material contract liabilities as of September 30, 2018.

The Company has elected the following practical expedients allowed under ASU 2014-09:

The following summarizes our revenue by melt type:

 

 

7

---

 

Note 4: Inventory

Our raw material and starting stock inventory is primarily comprised of ferrous and non-ferrous scrap metal and alloys such as nickel, chrome, molybdenum, cobalt and copper. Our semi-finished and finished steel products are work-in-process in various stages of production or are finished products waiting to be shipped to our customers. Operating materials are primarily comprised of forge dies and production molds and rolls that are consumed over their useful lives. During the nine months ended September 30, 2018 and 2017, we amortized these operating materials in the amount of $1.7 million and $1.5 million, respectively. This expense is recorded as a component of cost of products sold on the consolidated statements of operations and included as a part of our total depreciation and amortization on the consolidated statements of cash flows. Inventory is stated at the lower of cost or net realizable value with cost principally determined on a weighted average cost method. Such costs include the acquisition cost for raw materials and supplies, direct labor and applied manufacturing overhead. We assess market based upon actual and estimated transactions at or around the balance sheet date. Typically, we reserve for slow-moving inventory and inventory that is being evaluated under our quality control process. The reserves are based upon management’s expected method of disposition. Inventories consisted of the following:

 

 

Note 5: Long-Term Debt

Long-term debt consisted of the following:

 

 

Credit Facility

On August 3, 2018, we entered into the First Amended and Restated Revolving Credit, Term Loan and Security Agreement (“Credit Agreement”) with PNC Bank, National Association, as administrative agent and co-collateral agent, Bank of America, N.A., as co-collateral agent, and PNC Capital Markets LLC, as sole lead arranger and sole bookrunner. The Credit Agreement amended the prior Revolving Credit, Term Loan and Security Agreement (“Prior Agreement”), and provides for a senior secured revolving credit facility not to exceed $110.0 million (“Revolving Credit Facility”) and a senior secured term loan facility (“Term Loan”) in the amount of $10.0 million (together with the Revolving Credit Facility, the “Facilities”). The Company was in compliance with all the applicable financial covenants prior to the August 3, 2018 amendment to the Credit Agreement and at September 30, 2018.  

The Facilities, which expire August 3, 2023 (the ‘Expiration Date”), are collateralized by a first lien in substantially all of the assets of the company and its subsidiaries, except that no real property is collateral under the Facilities other than Company’s real property in North Jackson, Ohio.

Availability under the Credit Agreement is based on eligible accounts receivable and inventory. Further, the Company must maintain undrawn availability under the Credit Agreement of at least an amount equal to payments due on the notes issued in connection with the acquisition of the North Jackson facility (collectively, the “Notes”), plus 12.5% of the maximum borrowing amount of $110.0 million. This requirement exists until the Notes are paid in full, refinanced or extended.

The Company is required to pay a commitment fee of 0.25% based on the daily unused portion of the Revolving Credit Facility.

With respect to the Term Loan, the Company will pay quarterly installments of the principal of approximately $0.4 million, plus accrued and unpaid interest, on the first day of each fiscal quarter beginning on September 30, 2018. To the extent not previously paid, the Term Loan will become due and payable in full on the Expiration Date.

8

---

 

Amounts outstanding under the Facilities, at the Company’s option, will bear interest at either a base rate or a LIBOR based rate, in either case calculated in accordance with the terms of the Credit Agreement. Interest under the Credit Agreement is payable monthly. We elected to use the LIBOR based rate for the majority of the debt outstanding under the Facilities for the three months ended September 30, 2018, which was 3.61% on our Revolving Credit Facility and 4.11% for the Term Loan.

The Credit Agreement contains customary affirmative and negative covenants. If a triggering event occurs as defined in the Credit Agreement, the Company must maintain a fixed charge coverage ratio of not less than 1.10 to 1.0 measured on a rolling four quarter basis and calculated in accordance with the terms of the Credit Agreement.

At September 30, 2018, we had Credit Agreement related net deferred financing costs of approximately $1.0 million. For the nine months ended September 30, 2018, we amortized $0.2 million of deferred financing costs.

$6.7 million was drawn on the Revolving Credit Facility to fund cash restricted for use related to the New Markets Tax Credit (“NMTC”) Financing Transaction. As of September 30, 2018, NMTC related restricted cash receipts totaling $2.2 million were applied to the Company’s Revolving Credit Facility, described in Note 6.

Notes

In connection with the acquisition of the North Jackson facility, in August 2011, we issued $20.0 million in Notes to the sellers of the North Jackson facility as partial consideration of the acquisition.  

On January 21, 2016, the Company entered into Amended and Restated Notes in the aggregate principal amount of $20.0 million, each in favor of Gorbert Inc. (“Holder”). The Company’s obligations under the Notes are collateralized by a second lien on the same assets of the Company that collateralize the obligations of the Company under the Facilities.

The Notes were originally scheduled to mature on March 17, 2019. On March 30, 2018, the Company provided notification of its intent to extend the maturity date to March 17, 2020 in accordance with the terms of the Notes.

Upon the Company’s extension of the maturity date of the Notes to March 17, 2020, principal payments in the aggregate of $2.0 million will be required to be made in March 2019. In conjunction with the intended extension of the maturity date of the Notes, $2.0 million has been classified within current portion of long-term debt.  

Additionally, the Company has the option to further extend the maturity date of the Notes to March 17, 2021. Extending the maturity date of the Notes to March 17, 2021 would require a principal payment in the aggregate amount of $2.0 million to be made in March 2020.

The Notes bore interest at a rate of 5.0% per year through and including August 17, 2017 and bear a rate of 6.0% per year from and after August 18, 2017. Through and including June 18, 2017, all accrued and unpaid interest was payable semi-annually in arrears on each June 18 and December 18. After June 18, 2017, all accrued and unpaid interest is payable quarterly in arrears on each September 18, December 18, March 18 and June 18.

The Holder had the right to elect at any time on or prior to August 17, 2017 to convert all or any portion of the outstanding principal amount of the Notes. The Holder’s conversion rights expired and are no longer subject to exercise.     

Capital Leases

The Company enters into capital lease arrangements. The capital assets and obligations are recorded at the present value of minimum lease payments. The assets are included in Property, Plant and Equipment, net on the Consolidated Balance Sheets and are depreciated over the respective lease terms which range from three to five years. The long-term component of the capital lease obligations is included in Long-term debt and the current component is included in Current portion of long-term debt. During the nine months ended September 30, 2018, the Company entered into a new capital lease agreement for which the net present value of the minimum lease payments, at inception, was not significant. During the nine months ended September 30, 2017, the Company entered into capital lease agreements for which the net present value of the minimum lease payments, at inception, was $0.4 million. These amounts have been excluded from the Consolidated Statements of Cash Flows as they are non-cash.        

As of September 30, 2018, future minimum lease payments applicable to capital leases were as follows:

 

 

9

---

 

For the three and nine months ended September 30, 2018, the amortization of capital lease assets was $0.1 million and $0.4 million, respectively, which is included in cost of products sold in the Consolidated Statements of Operations.

Note 6: New Markets Tax Credit Financing Transaction

On March 9, 2018, the Company entered into a qualified New Markets Tax Credit financing program with PNC New Markets Investment Partners, LLC and Boston Community Capital, Inc. related to a new mid-size bar cell capital project at the Company’s Dunkirk, NY facility.  PNC New Markets Investment Partners, LLC made a capital contribution and the Company made a loan to Dunkirk Investment Fund, LLC (“Investment Fund”) under the qualified NMTC program. Through this financing transaction, the Company secured low interest financing and the potential for other future benefits related to its mid-size bar cell capital project.

In connection with the NMTC financing program, the Company loaned $6.7 million aggregate principal amount (“Leverage Loan”) due in March 2048, to the Investment Fund. Additionally, PNC New Markets Investment Partners, LLC contributed $3.5 million to the Investment Fund, and as such, PNC New Markets Investment Partners, LLC is entitled to substantially all tax and other benefits derived from the NMTC. The Investment Fund then contributed the proceeds to a community development entity (“CDE”). The CDE then loaned the funds, on similar terms, as the Leverage Loan to Dunkirk Specialty Steel, LLC, a wholly-owned subsidiary of the Company. The CDE loan proceeds are restricted for use on the mid-size bar cell capital project.

The NMTC is subject to 100 percent recapture for a period of seven years as provided in the Internal Revenue Code. The Company is required to comply with various regulations and contractual provisions that apply to the NMTC arrangement. Non-compliance with applicable requirements could result in projected tax benefits not being realized and, therefore, require the Company to indemnify PNC New Markets Investment Partners, LLC for any loss or recapture of NMTCs related to the financing until the Company’s obligation to deliver tax benefits is relieved. The Company does not anticipate any credit recaptures will be required in connection with this arrangement. This transaction also includes a put/call provision whereby the Company may be obligated or entitled to repurchase PNC New Markets Investment Partners, LLC’s interest in the Investment Fund. The Company believes that PNC New Markets Investment Partners, LLC will exercise the put option in March 2025, at the end of the recapture period. The value attributed to the put/call is negligible.

Direct costs incurred in structuring this financing transaction totaled $0.7 million. These costs were deferred and will be amortized over the term of the loans.  

The Company has determined that the Investment Fund and CDE are each a VIE, and that it is the primary beneficiary of each VIE.  This conclusion was reached based on the following:

Because the Company is the primary beneficiary of each VIE, these entities have been included in the Company’s Consolidated Financial Statements.  

As of September 30, 2018, the Company recorded $6.2 million as restricted cash which is included in Other long-term assets on the Company’s Consolidated Balance Sheets and $2.8 million as Other long-term liabilities related to this financing transaction. Cash is restricted for use in bar cell capital purchases only. Other long-term liabilities represent funds contributed to the Investment Fund by PNC New Markets Investment Partners, LLC. There was no significant change in restricted cash as of September 30, 2018 compared to June 30, 2018. 

Note 7:  Fair Value Measurement

The fair value hierarchy has three levels based on the inputs used to determine fair value, which are as follows:

Level 1 — Unadjusted quoted prices available in active markets for the identical assets or liabilities at the measurement date.

Level 2 — Unadjusted quoted prices in active markets for similar assets or liabilities, or unadjusted quoted prices for identical or similar assets or liabilities in markets that are not active, or inputs other than quoted prices that are observable for the asset or liability.

Level 3 — Unobservable inputs that cannot be corroborated by observable market data and reflect the use of significant management judgment. These values are generally determined using pricing models for which the assumptions utilize management’s estimates of market participant assumptions.

The fair value hierarchy requires the use of observable market data when available. In instances where the inputs used to measure fair value fall into different levels of the fair value hierarchy, the fair value measurement has been determined based on the lowest level input significant to the fair value measurement in its entirety. Our assessment of the significance of a particular item to the fair value measurement in its entirety requires judgment, including the consideration of inputs specific to the asset or liability.

The carrying amounts of our cash, accounts receivable and accounts payable approximated fair value at September 30, 2018 and December 31, 2017 due to their short-term maturities (Level 1). The fair value of the Term Loan and Revolving Credit facility at September 30, 2018 and December 31, 2017 approximated the carrying amount as the interest rate is based upon floating short-term interest rates (Level 2).  At September 30, 2018 and December 31, 2017, the fair value of our Notes was approximately $18.9 and $18.8 million, respectively (Level 2).

10

---

 

Note 8:  Commitments and Contingencies

From time to time, various lawsuits and claims have been or may be asserted against us relating to the conduct of our business, including routine litigation relating to commercial and employment matters. The ultimate cost and outcome of any litigation or claim cannot be predicted with certainty. Management believes, based on information presently available, that the likelihood that the ultimate outcome of any such pending matter will have a material adverse effect on our financial condition, or liquidity or a material impact on our results of operations is remote, although the resolution of one or more of these matters may have a material adverse effect on our results of operations for the period in which the resolution occurs.

Note 9:  Income Taxes

Management estimates the annual effective income tax rate quarterly, based on current annual forecasted results. Items unrelated to current year ordinary income are recognized entirely in the period identified as a discrete item of tax. The quarterly income tax provision (benefit) is comprised of tax on ordinary income provided at the most recent estimated annual effective tax rate (“ETR”), increased or decreased for the tax effect of discrete items.

For the nine months ended September 30, 2018 and 2017, our estimated annual effective tax rates applied to ordinary income (losses) were 18.5% and 22.6%, respectively. The difference between the statutory rate and the projected annual ETR of 18.5% for 2018 is primarily due to increased research and development credits. Our estimated ETR incorporated the 21% statutory U.S. corporate income tax rate that was enacted on December 22, 2017 by the Tax Cuts and Jobs Act, for the tax years beginning after December 31, 2017.

Including the effect of discrete items, our effective tax rate for the nine months ended September 30, 2018 was 19.1%. The difference between the annual ETR of 18.5% and the quarterly rate of 19.1% for the nine months ended September 30, 2018 is primarily related to the expiration of fully vested stock options partially offset by research and development credits. Our pre-tax income for the nine months ended September 30, 2017 was approximately break-even and our effective tax rate for the same period varied due to discrete items, primarily expense from the expiration of fully vested stock options.

Note 10: Derivatives and Hedging

The Company invoices certain customers in foreign currencies. In order to mitigate the risks associated with fluctuations in exchange rates with the US Dollar, the Company entered into foreign exchange forward contracts during 2018 and 2017 for a portion of these sales and has designated these contracts as cash flow hedges. The notional value of these contracts at September 30, 2018 and December 31, 2017 was $1.1 million and $4.5 million, respectively. An accumulated unrealized gain of less than $0.1 million was recorded in other comprehensive income for the nine months ended September 30, 2018 and an accumulated unrealized loss of $0.1 million was recorded in other comprehensive income for the 12 months ended December 31, 2017.  

 

11

---

 

Forward-Looking Statements

This Quarterly Report on Form 10-Q contains or incorporates forward looking statements within the meaning of the Private Securities Reform Act of 1995, which involves risks and uncertainties. The following information should be read in conjunction with the unaudited consolidated financial information and the notes thereto included in this Quarterly Report on Form 10-Q. You should not place undue reliance on these forward looking statements. Actual events or results may differ materially due to competitive factors and other factors referred to in Part 1A. Risk Factors in our Annual Report on Form 10-K for the year ended December 31, 2017, our other filings with the Securities and Exchange Commission and elsewhere in this Quarterly Report. These factors may cause our actual results to differ materially from any forward looking statement. These forward looking statements are based on current expectations, estimates, forecasts, and projections about the industry and markets in which we operate, and management’s beliefs and assumptions. In addition, other written or oral statements that constitute forward looking statements may be made by us or on our behalf. Words such as “expect,” “anticipate,” “intend,” “plan,” “believe,” “could,” “estimate,” “may,” “target,” “project,” or variations of such words and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and involve risks, uncertainties, and assumptions that are difficult to predict.

Business Overview

We manufacture and market semi-finished and finished specialty steel products, including stainless steel, nickel alloys, tool steel and certain other alloyed steels. Our manufacturing process involves melting, remelting, heat treating, hot and cold rolling, forging, machining and cold drawing of semi-finished and finished specialty steels. Our products are sold to rerollers, forgers, service centers, original equipment manufacturers and wire redrawers. Our customers further process our products for use in a variety of industries, including the aerospace, power generation, oil and gas, heavy equipment and general industrial markets. We also perform conversion services on materials supplied by customers.

Sales in the third quarter of 2018 were $69.1 million, an increase of $18.2 million, or 35.7%, from the third quarter of 2017 and an increase of $3.0 million, or 4.5%, from the second quarter of 2018. Overall, net sales increased for the majority of end markets in the third quarter of 2018 compared to the third quarter of 2017 with aerospace up $9.6 million, or 34.6%, oil & gas up $4.3 million, or 94.3%, heavy equipment up $3.7 million, or 38.4%, general industrial and conversion services up $1.1 million, or 19.1%, offset by power generation being down $0.5 million, or 16.7%. Compared to the second quarter of 2018, heavy equipment was up $4.4 million, or 48.4%, oil & gas was up $1.1 million, or 14.1%, power generation was up $0.4 million, or 16.3% and general industrial was up $0.2 million, or 5.1%, offset by aerospace being down $2.9 million, or 7.2%, and conversion services was down $0.3 million, or 15.0%. During the third quarter of 2018, our net sales of premium alloy products, which we define as all vacuum induction melt products, represented $9.2 million, or 13.3% of total net sales. This compared to the third quarter of 2017 premium alloy net sales of $7.4 million, or 14.5% of total net sales, and the second quarter of 2018 premium alloy net sales of $12.0 million, or 18.2% of total net sales. Our premium alloy products are primarily sold to the aerospace end market. Our backlog, before surcharges, at September 30, 2018 was $111.4 million, an increase of $45.2 million, or 68.3%, compared to September 30, 2017 and an increase of $7.2 million, or 6.9%, compared to June 30, 2018.

The Company’s gross margin for the third quarter of 2018 was $10.4 million, or 15.1% of net sales, compared to $5.5 million, or 10.7% of net sales, for the third quarter of 2017 and $11.7 million, or 17.7% of net sales, for the second quarter of 2018. The increase in our gross margin from the third quarter of 2017 is largely a result of shift in product mix to higher value premium alloys, higher volumes, base price increases, and cost reduction programs.

Selling, General and Administrative (“SG&A”) expenses were $5.1 million, or 7.4% of sales, in the third quarter 2018 compared to $4.4 million, or 8.7% of sales, in the third quarter of 2017 and $5.8 million, or 8.9% of sales, in the second quarter of 2018. SG&A decreased as a percent of sales compared to the second quarter 2018 and the third quarter 2017.

The Company’s net income was $3.9 million for the third quarter of 2018 compared to approximately break-even in the third quarter of 2017 and net income of $4.0 million in the second quarter of 2018.  

12

---

 

Results of Operations

Three months ended September 30, 2018 as compared to the three months ended September 30, 2017

 

 

13

---

 

 

 

The majority of our products are sold to service centers rather than the ultimate end market customers. The end market information in this Quarterly Report is our estimate based upon our knowledge of our customers and the grade of material sold to them, which they will in-turn sell to the ultimate end market customer.

 

 

Net sales:

Net sales for the three months ended September 30, 2018 increased $18.2 million, or 35.7%, as compared to the three months ended September 30, 2017. This reflects an increase in consolidated shipments and average sales dollar per shipped ton of 26.0% and 7.7%, respectively. The increase in sales dollars per ton for the three months ended September 30, 2018, compared to the same period in 2017, is primarily the result of shift in mix of products to higher value premium alloy. In addition, announced base price increases and higher surcharges relative to market pricing of raw materials and graphite electrodes contributed to the overall increase in net sales. Product sales to aerospace, oil & gas, heavy equipment, general industrial and conversion services end markets increased while power generation decreased. As a percent of sales, our premium alloy sales decreased to 13.3% of total sales for the three months ended September 30, 2018 compared to 14.5% for the three months ended September 30, 2017; however, premium alloy sales for the three months ended September 30, 2018 increased by $1.8 million, or 24.3%, when compared to the three months ended September 30, 2017. Our premium alloy sales are primarily for the aerospace market and are the principal contributing factor of growth in that end market.

We continuously monitor market price fluctuations of key raw materials. The market values for these raw materials continue to fluctuate based on supply and demand, market disruptions, and other factors. We maintain sales price surcharge mechanisms on certain of our products, priced at time of shipment, to mitigate the risk of raw material cost fluctuations. There can be no assurance that these sales price adjustments will completely offset our raw material costs.

The following table reflects the average market values per pound for selected months during the last 13-month period:

 

 

Sources:  Nickel is the daily average LME Cash Settlement Price; Chrome and Molybdenum is the final monthly average as published by CRUs; Carbon is the consumer price for #1 Industrial Bundles in the Pittsburgh, PA area as reported in American Metal Market.

14

---

 

Gross margin:

Our gross margin, as a percent of sales, was 15.1% for the three months ended September 30, 2018 as compared to 10.7% for the three months ended September 30, 2017. The increase in our gross margin is largely a result of shift in product mix to higher value premium alloys, higher volumes, base price increases, and cost reduction programs. Gross margin, as a percent of sales compared to the three months ending June 30, 2018 decreased by 2.6%, primarily on lower sales of premium alloy products.

Selling, general and administrative expenses:

Our SG&A expenses consist primarily of employee costs, which include salaries, payroll taxes and benefit related costs, legal and accounting services, stock compensation and insurance costs. SG&A expenses increased by $0.7 million in the three months ended September 30, 2018 as compared to the three months ended September 30, 2017. The increase is primarily due to salary and employment costs including employee incentive compensation which increased approximately $0.7 million. As a percentage of sales, our SG&A expenses were 7.4% of sales for the three months ended September 30, 2018 and 8.7% of sales for the three months ended September 30, 2017.

Interest expense and other financing costs:

Interest expense for the three months ended September 30, 2018 totaled $0.9 million, compared to $1.1 million for the three months ended September 30, 2017. The decrease in interest expense is attributable to lower debt resulting from the second quarter public offering activity.

Deferred financing amortization was $0.1 million in the third quarter of 2018 which was consistent with the same period in the prior year.   

Income tax provision:

Management estimates the annual effective income tax rate quarterly, based on current annual forecasted results. Items unrelated to current year ordinary income are recognized entirely in the period identified as a discrete item of tax. The quarterly income tax provision (benefit) is comprised of tax on ordinary income provided at the most recent estimated annual effective tax rate (“ETR”), increased or decreased for the tax effect of discrete items.

For the three months ended September 30, 2018 and 2017, our estimated annual effective tax rates applied to ordinary income (losses) were 18.5% and 22.6%, respectively. The difference between the statutory rate and the projected annual ETR of 18.5% for 2018 is primarily due to increased research and development credits. Our estimated ETR incorporated the 21% statutory U.S. corporate income tax rate that was enacted on December 22, 2017 by the Tax Cuts and Jobs Act, for tax years beginning after December 31, 2017.

Including the effect of discrete items, our effective tax rates for the three months ended September 30, 2018 was 10.5%. The difference between the annual ETR of 18.5% and the rate of 10.5% for the three months ended September 30, 2018 is primarily related to higher than expected research and development credits.

Net income:

For the three months ended September 30, 2018, the Company recorded net income of $3.9 million, or $0.44 per diluted share, compared to approximately break-even for the three months ended September 30, 2017.  

15

---

 

Nine months ended September 30, 2018 as compared to nine months ended September 30, 2017

 

 

16

---

 

 

 

The majority of our products are sold to service centers rather than the ultimate end market customers. The end market information in this Quarterly Report is our estimate based upon our knowledge of our customers and the grade of material sold to them, which they will in-turn sell to the ultimate end market customer.

 

 

 

Net sales:

Net sales for the nine months ended September 30, 2018 increased $46.5 million, or 30.5%, as compared to the nine months ended September 30, 2017. This reflects an increase in consolidated shipments and average sales dollar per shipped ton of 14.6% and 13.8%, respectively. The increase in sales dollars per ton in the nine months ended September 30, 2018, compared to the same period in 2017, is primarily the result of a shift in mix of products to higher value premium alloy. In addition, announced base price increases and higher surcharges relative to market pricing of raw materials and graphite electrodes contributed to the overall increase in net sales. Product sales to all end markets, except power generation, increased. During the nine months ended September 30, 2018, premium alloy sales increased by $13.1 million, or 65.4%, when compared to the nine months ended September 30, 2017. As a percent of sales, our premium alloy sales increased to 16.6% of total sales for the nine months ended September 30, 2018 compared to 13.1% for the nine months ended September 30, 2017. Our premium alloy sales are primarily for the aerospace market and are the principal contributing factor of growth in that end market.

Gross margin:

Our gross margin, as a percent of sales, was 15.8% for the nine months ended September 30, 2018 as compared to 11.1% for the nine months ended September 30, 2017. The increase in our gross margin is largely a result of a shift in product mix to higher value premium alloys, higher volumes, base price increases, and cost reduction programs.

Selling, general and administrative expenses:

Our SG&A expenses consist primarily of employee costs, which include salaries, payroll taxes and benefit related costs, legal and accounting services, stock compensation and insurance costs. SG&A expenses increased by $2.5 million in the nine months ended September 30, 2018 as compared to the nine months ended September 30, 2017. The increase is primarily due to salary expense and employment costs including employee incentive compensation which increased $2.6 million. As a percentage of sales, our SG&A expenses were 8.1% of sales for the nine months ended September 30, 2018 and 9.0% of sales for the nine months ended September 30, 2017.

17

---

 

Interest expense and other financing costs:

Interest expense for the nine months ended September 30, 2018 totaled $3.2 million, compared to $3.0 million for the nine months ended September 30, 2017. The increase in interest expense is attributable to increased interest rates.  

Deferred financing amortization was $0.2 million for the nine months ended September 30, 2018 and 2017, respectively.

Income tax provision:

Management estimates the annual effective income tax rate quarterly, based on current annual forecasted results. Items unrelated to current year ordinary income are recognized entirely in the period identified as a discrete item of tax. The quarterly income tax provision (benefit) is comprised of tax on ordinary income provided at the most recent ETR, increased or decreased for the tax effect of discrete items.

For the nine months ended September 30, 2018 and 2017, our estimated annual effective tax rates applied to ordinary income (losses) were 18.5% and 22.6%, respectively. The difference between the statutory rate and the projected annual ETR of 18.5% for 2018 is primarily due to increased research and development credits. Our estimated ETR incorporated the 21% statutory U.S. corporate income tax rate that was enacted on December 22, 2017 by the Tax Cuts and Jobs Act, for tax years beginning after December 31, 2017.

Including the effect of discrete items, our effective tax rate for the nine months ended September 30, 2018 was 19.1%. The difference between the annual ETR of 18.5% and the rate of 19.1% for the nine months ended September 30, 2018 is primarily related to the expiration of fully vested stock options partially offset by higher than expected research and development credits. Our pre-tax income for the nine months ended September 30, 2017 was approximately break-even and our effective tax rate for the same period varied due to discrete items, primarily expense from the expiration of fully vested stock options.

Net income:

For the nine months ended September 30, 2018, the Company recorded net income of $10.1 million, or $1.23 per diluted share, compared to approximately break-even net income for the nine months ended September 30, 2017.  

Liquidity and Capital Resources

Historically, we have financed our operating activities through cash provided by operations and cash provided through our credit facilities.  

On May 25, 2018, the Company completed an underwritten, public offering involving the issuance and sale by the Company of 1,224,490 shares of common stock at a public offering price of $24.50 per share. In addition, the Company granted the underwriters a 30-day option to purchase up to an additional 183,673 shares of common stock. On June 1, 2018, the underwriters exercised the option in full, and an additional 183,673 shares of common stock were issued and sold on June 5, 2018. The public offering resulted in gross proceeds to the Company of approximately $34.5 million, or $32.2 million net of the underwriting discount and other offering fees and expenses. We used the net proceeds from the public offering to repay amounts outstanding under the Company’s revolving credit facility.

On March 9, 2018, the Company entered into a qualified New Markets Tax Credit financing program with PNC New Markets Investment Partners, LLC and Boston Community Capital, Inc. related to a new mid-size bar cell capital project at the Company’s Dunkirk, NY facility. PNC New Markets Investment Partners, LLC made a capital contribution and the Company made a loan to Dunkirk Investment Fund, LLC (“Investment Fund”) under the qualified NMTC program. Through this financing transaction, the Company secured low interest financing and the potential for other future benefits related to its mid-size bar cell capital project.

In connection with the NMTC financing program, the Company loaned $6.7 million aggregate principal amount (“Leverage Loan”) due in March 2048, to the Investment Fund. Additionally, PNC New Markets Investment Partners, LLC contributed $3.5 million to the Investment Fund, and as such, PNC New Markets Investment Partners, LLC is entitled to substantially all tax and other benefits derived from the NMTC. The Investment Fund then contributed the proceeds to a community development entity (“CDE”). The CDE then loaned the funds, on similar terms, as the Leverage Loan to Dunkirk Specialty Steel, LLC, a wholly-owned subsidiary of the Company. The CDE loan proceeds are restricted for use on the mid-size bar cell capital project.

Net cash provided by (used in) operating activities:

During the nine months ended September 30, 2018, net cash provided by operating activities was $0.7 million. Our net income, adjusted for non-cash expenses, generated $27.9 million. We utilized $31.0 million of cash from managed working capital, which we define as net accounts receivable, plus inventory and minus accounts payable. Accounts receivable increased $19.2 million due to the increase in sales in the third quarter of 2018 compared to the fourth quarter of 2017. Inventories used $7.9 million in support of the increased backlog and $4.0 million decrease in accounts payable. Accrued Employment Costs increased $2.6 million primarily due to increased variable compensation expenses.

During the nine months ended September 30, 2017, we generated $0.9 million net cash in operating activities. Net income adjusted for non-cash expenses was $15.5 million. We utilized $13.1 million of cash for managed working capital which we define as net accounts receivable, plus inventory and minus accounts payable. $7.1 million of the increase in managed working capital is from accounts receivable due to the increase in sales in the third quarter of 2017 compared to the fourth quarter of 2016. Inventories used $16.7 million reflecting higher commodity cost combined with increased quantities in support of higher backlog which was partially offset by the $10.7 million increase in accounts payable due to increased production activity. Accrued employment costs decreased by $0.9 million due to the payout of 2016 variable compensation partially offset by other payroll related accruals. Other activities, primarily maintenance costs, used $0.4 million of cash and income taxes used $0.1 million.

18

---

 

Net cash used in investing activities:

During the nine months ended September 30, 2018, we used $13.2 million in cash for capital expenditures compared to $4.7 million for the nine months ended September 30, 2017. We expect capital expenditures to be approximately $16.5 million in 2018.      

Net cash provided by financing activities:

Net cash provided by financing activities netted $18.5 million in cash from financing activities for the nine months ended September 30, 2018. The change was driven by $32.2 million of proceeds from the equity offering which we used to repay amounts outstanding under the Company’s Revolving Credit Facility. Financing activities were also impacted by higher working capital levels, as well as, borrowings related to the mid-size bar cell capital project at our Dunkirk, NY facility. These borrowings were done in conjunction with utilization of the NMTC financing program, described in Note 6.

We received $4.0 million in cash from financing activities for the nine months ended September 30, 2017. We increased borrowings under our Revolving Credit Facility by $7.8 million due to increased working capital requirements resulting from increased net sales and backlog. We paid down $3.9 million of our term loan and received $0.1 million for shares issued through our Employee Stock Purchase Plan.

We believe that our cash flows from continuing operations as well as available borrowings under our credit facility are adequate to satisfy our working capital, capital expenditure requirements, and other contractual obligations for the foreseeable future, including at least the next 12 months.

 

Credit Facility

On August 3, 2018, we entered into the First Amended and Restated Revolving Credit, Term Loan and Security Agreement (“Credit Agreement”) with PNC Bank, National Association, as administrative agent and co-collateral agent, Bank of America, N.A., as co-collateral agent, and PNC Capital Markets LLC, as sole lead arranger and sole bookrunner. The Credit Agreement amended the prior Revolving Credit, Term Loan and Security Agreement (“Prior Agreement”), and provides for a senior secured revolving credit facility not to exceed $110.0 million (“Revolving Credit Facility”) and a senior secured term loan facility (“Term Loan”) in the amount of $10.0 million (together with the Revolving Credit Facility, the “Facilities”). The Company was in compliance with all the applicable financial covenants prior to the August 3, 2018 amendment to the Credit Agreement and September 30, 2018.

The Facilities, which expire August 3, 2023 (the ‘Expiration Date”), are collateralized by a first lien in substantially all of the assets of the company and its subsidiaries, except that no real property is collateral under the Facilities other than Company’s real property in North Jackson, Ohio.

Availability under the Credit Agreement is based on eligible accounts receivable and inventory. Further, the Company must maintain undrawn availability under the Credit Agreement of at least an amount equal to payments due on the notes issued in connection with the acquisition of the North Jackson facility (collectively, the “Notes”), plus 12.5% of the maximum borrowing amount of $110.0 million. This requirement exists until the Notes are paid in full, refinanced or extended.

The Company is required to pay a commitment fee of 0.25% based on the daily unused portion of the Revolving Credit Facility.

With respect to the Term Loan, the Company will pay quarterly installments of the principal of approximately $0.4 million, plus accrued and unpaid interest, on the first day of each fiscal quarter beginning on September 30, 2018. To the extent not previously paid, the Term Loan will become due and payable in full on the Expiration Date.

Amounts outstanding under the Facilities, at the Company’s option, will bear interest at either a base rate or a LIBOR based rate, in either case calculated in accordance with the terms of the Credit Agreement. Interest under the Credit Agreement is payable monthly. We elected to use the LIBOR based rate for the majority of the debt outstanding under the Facilities for the three months ended September 30, 2018, which was 3.61% on our Revolving Credit Facility and 4.11% for the Term Loan.

The Credit Agreement contains customary affirmative and negative covenants. If a triggering event occurs as defined in the Credit Agreement, the Company must maintain a fixed charge coverage ratio of not less than 1.10 to 1.0 measured on a rolling four quarter basis and calculated in accordance with the terms of the Credit Agreement.

At September 30, 2018, we had Credit Agreement related net deferred financing costs of approximately $1.0 million. For the nine months ended September 30, 2018, we amortized $0.2 million of deferred financing costs.

$6.7 million was drawn on the Revolving Credit Facility to fund cash restricted for use related to the New Markets Tax Credit (“NMTC”) Financing Transaction. As of September 30, 2018, NMTC related restricted cash receipts totaling $2.2 million were applied to the Company’s Revolving Credit Facility, described in Note 6.

Notes

In connection with the acquisition of the North Jackson facility, in August 2011, we issued $20.0 million in Notes to the sellers of the North Jackson facility as partial consideration of the acquisition.

On January 21, 2016, the Company entered into Amended and Restated Notes in the aggregate principal amount of $20.0 million, each in favor of Gorbert Inc. (“Holder”). The Company’s obligations under the Notes are collateralized by a second lien on the same assets of the Company that collateralize the obligations of the Company under the Facilities.

19

---

 

The Notes were originally scheduled to mature on March 17, 2019. On March 30, 2018, the Company provided notification of its intent to extend the maturity date to March 17, 2020 in accordance with the terms of the Notes.

Upon the Company’s extension of the maturity date of the Notes to March 17, 2020, principal payments in the aggregate of $2.0 million will be required to be made in March 2019. In conjunction with the intended extension of the maturity date of the Notes, $2.0 million has been classified within current portion of long-term debt.  

Additionally, the Company has the option to further extend the maturity date of the Notes to March 17, 2021. Extending the maturity date of the Notes to March 17, 2021 would require a principal payment in the aggregate amount of $2.0 million to be made in March 2020.

The Notes bore interest at a rate of 5.0% per year through and including August 17, 2017 and bear a rate of 6.0% per year from and after August 18, 2017. Through and including June 18, 2017, all accrued and unpaid interest was payable semi-annually in arrears on each June 18 and December 18. After June 18, 2017, all accrued and unpaid interest is payable quarterly in arrears on each September 18, December 18, March 18 and June 18.

The Holder had the right to elect at any time on or prior to August 17, 2017 to convert all or any portion of the outstanding principal amount of the Notes. The Holder’s conversion rights expired and are no longer subject to exercise.    

Capital Leases

The Company enters into capital lease arrangements. The capital assets and obligations are recorded at the present value of minimum lease payments. The assets are included in Property, Plant and Equipment, net on the Consolidated Balance Sheets and are depreciated over the respective lease terms which range from three to five years. The long-term component of the capital lease obligations is included in Long-term debt and the current component is included in Current portion of long-term debt. During the nine months ended September 30, 2018, the Company has entered into a new capital lease agreement for which the net present value of the minimum lease payments, at inception, was not significant. During the nine months ended September 30, 2017, the Company entered into capital lease agreements for which the net present value of the minimum lease payments, at inception, was $0.4 million. These amounts have been excluded from the Consolidated Statements of Cash Flows as they are non-cash.  

Collective Bargaining Agreement

During the third quarter the Company entered into new labor agreements with the hourly employees of its North Jackson and Bridgeville facilities. A six-year collective bargaining agreement with the hourly employees at its North Jackson Specialty Steel facility was agreed to effective July 1, 2018 and expires on June 30, 2024 and a new five-year agreement with the hourly employees at its Bridgeville facility was agreed to effective September 1, 2018 and expires on August 31, 2023. Onetime costs incurred in the quarter in the negotiation and management of the new Bridgeville labor agreement totaled $0.1 million, or $0.01 per diluted share.

 

 

The Company has reviewed its market risk and believes there are no significant changes from that disclosed in the Company’s Annual Report on Form 10-K for the year ended December 31, 2017, except as provided in this Form 10-Q in “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

The Company’s management, including the Company’s Chairman, President and Chief Executive Officer and its Vice President of Finance, Chief Financial Officer and Treasurer, performed an evaluation of the effectiveness of the Company’s disclosure controls and procedures. Based on that evaluation, the Company’s Chairman, President and Chief Executive Officer and its Vice President of Finance, Chief Financial Officer and Treasurer concluded that, as of the end of the fiscal period covered by this quarterly report, the Company’s disclosure controls and procedures are effective. During the fiscal quarter ended September 30, 2018, there were no changes in the Company’s internal control over financial reporting which have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

20

---

 

There are no material changes from the legal proceedings disclosed in Item 3. of the Company’s Annual Report on Form 10-K for the year ended December 31, 2017.

In addition to the other information set forth in this Quarterly Report on Form 10-Q, the factors discussed in Part I, “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the year ended December 31, 2017 could materially affect our business, financial conditions or future results. Those risk factors are not the only risks facing us. Additional risks and uncertainties not currently known or that we currently deem to be immaterial also may materially adversely affect our business, financial condition or operating results. We believe that there have been no material changes in our risk factors from those disclosed in our Annual Report on Form 10-K for the year ended December 31, 2017 and our Quarterly Report on Form 10-Q for the quarter ended June 30, 2018.

None.

None.

Not Applicable.

Not Applicable.

21

---

 

 

 

22

---

 

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

23

Exhibit 31.1

CERTIFICATION

I, Dennis M. Oates, certify that:

 

 

Exhibit 31.2

CERTIFICATION

I, Christopher T. Scanlon, certify that:

 

 

Exhibit 32.1

CERTIFICATION PURSUANT TO 18 U.S.C. SECTION 1350

AS ADOPTED PURSUANT TO SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

In connection with the Quarterly Report of Universal Stainless & Alloy Products, Inc. (the “Company”) on Form 10-Q for the period ended September 30, 2018 as filed with the Securities and Exchange Commission on the date hereof (the “Report”), each of the undersigned, in the capacities and on the dates indicated below, hereby certify pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that to his knowledge: